Evolution Fury 5 Table Saw Review 2026: Still Worth It?

The Evolution Fury 5 S sits in a strange spot. It costs less than most name brand jobsite saws, yet it claims to cut steel, aluminium, plastic, and wood with nails in it. That sounds too good to be true.

So I spent real time with this saw, cut real material, and tracked what annoyed me. This review covers the unboxing, the fence, the dust port, the noise, and the parts that genuinely frustrate owners.

If you want a saw for a home garage and your budget is tight, keep reading. You will know by the end whether this one deserves your money in 2026.

In A Nutshell:

• The multimaterial blade is the headline feature. One tungsten carbide tipped blade cuts mild steel, aluminium, plastic, and timber. You do not swap blades between materials. That saves money and saves time.
• Power is adequate, not huge. The 1500 watt motor handles 2×4 stock and sheet goods fine. It bogs under thick hardwood ripping, and you learn to feed slower.
• The fence is the weak link. It locks at the front only. You must check the rear every single time, or your rip will drift. This is the single most common complaint from long term owners.
• Build quality is budget level and you can feel it. The pressed steel table flexes. The mitre gauge has play. The pivot joints loosen over months of use.
• Value is still strong for hobby users. You get a table saw, a stand, a usable blade, and a three year warranty for a price that undercuts most rivals by a wide margin.
• It is not a professional daily driver. Trim carpenters and site joiners will outgrow it fast.

Evolution Fury 5 S Table Saw

Last update on 2026-10-16 / Affiliate links / Images from Amazon Product Advertising API

The Fury 5 S is Evolution’s entry level table saw. It uses a 255mm blade, a 1500 watt induction style universal motor, and a cast style table surface measuring roughly 570mm by 577mm. Side and rear extensions push the working area out to about 1200mm by 640mm. The saw sits on a folding tubular steel stand that comes in the box.

The core idea behind this machine is simple. Evolution built its reputation on blades that cut metal without coolant and without a shower of hot sparks.

The Fury 5 S brings that technology to a bench saw. You get one blade for every job, which suits a mixed workshop where you cut studwork one day and angle iron the next. That versatility is the reason people buy it, and it is the reason they forgive its rough edges.

The Unboxing Experience

The box arrives heavy and flat. Mine weighed around 28kg and needed two hands plus a knee. Inside you find the saw body nested in moulded polystyrene, the four stand legs strapped separately, and a small parts bag taped to the side.

The parts bag holds the rip fence, the mitre gauge, two blade spanners, a push stick, the riving knife, the blade guard, and a thin instruction booklet. The 255mm multimaterial blade comes already fitted, which is a nice touch because fitting it blind is fiddly.

Expect to spend about thirty minutes on assembly. The legs bolt on with four bolts each and the hardware is soft, so a decent socket set beats the supplied spanner.

The manual uses tiny diagrams. I watched the official assembly video instead and finished faster. First impression out of the box: lighter than expected, and the paint is thicker than the steel underneath.

Key Specifications At A Glance

Blade diameter sits at 255mm with a 25.4mm bore. Maximum cut depth at 90 degrees is 85mm. Tilt the blade to 45 degrees and depth drops to 58mm. No load speed runs around 2500 rpm, which is slower than a wood only saw on purpose, because slow speed is what lets the carbide teeth survive steel.

Rip capacity to the right of the blade reaches roughly 580mm with the extension pulled out. The dust port measures 35mm. Weight lands near 28kg including the stand.

Evolution rates the saw for mild steel plate up to 6mm and box section up to 3mm. The three year warranty applies once you register the tool online, and that registration step catches a lot of buyers out. Do it the same week you buy. Note also that this model has been discontinued in some regions, so stock varies by retailer.

Top 3 Alternative For Evolution Fury 5 S Table Saw

Last update on 2026-10-16 / Affiliate links / Images from Amazon Product Advertising API

Evolution Power Tools Rage 5 S Multipurpose Table Saw

Last update on 2026-10-16 / Affiliate links / Images from Amazon Product Advertising API

DEWALT DWE7485WS Compact Portable Jobsite Table Saw with Stand

Last update on 2026-10-16 / Affiliate links / Images from Amazon Product Advertising API

SKIL TS6307 00 15 Amp 10 Inch Jobsite Table Saw with Folding Stand

Build Quality And First Impressions

Pick the saw up and you immediately understand the price. The table is pressed and coated rather than machined cast iron. Press down hard on the outer corner of the extension wing and you see a little flex. This is a lightweight saw, and light means it moves.

The stand feels better than I expected. The tubes are reasonably thick and the folding action is positive. On an uneven garage floor it still rocks, so a shim under one foot helps.

The switch housing is the cheapest feeling part. It is plastic, it sits low on the front, and there is no large paddle stop. You hunt for it with your knee and often miss. Fit and finish across the castings is acceptable. Nothing arrived bent. Nothing rattled loose in transit. For the money the saw feels honest rather than impressive.

Cutting Performance On Wood

On softwood the Fury 5 S performs well. Ripping 2×4 pine is effortless and the cut face comes off clean enough for framing without any sanding. Crosscutting 18mm plywood gives minor tearout on the underside, which is normal with a 24 tooth multimaterial blade.

Push into thick oak or beech and the motor note drops. You feel the saw ask you to slow down. Feed at a steady pace and it completes the cut. Rush it and the blade heats and the finish suffers.

The supplied blade is a compromise blade, not a fine finish blade. If you do mostly woodwork, buy a 40 tooth or 60 tooth wood blade in 255mm with a 25.4mm bore. That single upgrade transforms cut quality more than any other change you can make to this saw.

Cutting Metal And Plastic

This is where the Fury 5 S earns attention. I cut 3mm mild steel angle and 2mm box section. The blade sliced through with a loud grinding note and left warm chips rather than glowing sparks. The cut edge needed only a light file to remove burr.

Clamping matters more than anything here. Thin metal grabs and climbs if it is loose. Use the mitre gauge, use a clamp, and never freehand metal on this saw.

Aluminium cuts beautifully and leaves a near polished edge. Plastic and composite board cut cleanly if you feed slowly, because fast feeding melts the kerf shut.

Be realistic about blade life. Cutting steel wears the carbide tips far quicker than wood does. Expect a replacement blade after a season of regular metal work.

The Fence System And Accuracy

The rip fence is the part owners complain about most, and the complaint is fair. It clamps at the front rail only. The rear of the fence floats. If you nudge it while locking, the far end drifts and your rip tapers.

My routine became a habit within a week. Set the front, measure at the front of the blade, measure at the back of the blade, then lock. Every cut. No exceptions.

Once squared, the fence holds position fine during the cut. It does not wander under load. The problem is setting it, not keeping it.

The mitre gauge is worse. It has noticeable slop in the slot and the lock does not hold a precise angle under pressure. Most owners build a simple crosscut sled, and I recommend you plan for that from day one.

Dust Collection Reality

Evolution fits a 35mm dust port under the blade shroud. Hook a workshop vacuum to it and the saw captures maybe half the dust produced. That is honest performance for this class of tool.

The blade guard has no second port on top. All the fine dust thrown upward escapes into the room. In an enclosed garage you notice the haze after twenty minutes.

There is a second problem that only shows up with metal. Steel chips are hot and sharp, and they land in your vacuum bag mixed with wood dust. That combination is a genuine fire risk. Empty the extractor between material types.

Wear a mask. Open the door. Treat the dust port as a helpful extra rather than a working extraction system, and you will set expectations correctly.

Noise And Vibration

The Fury 5 S is loud. The universal motor screams at startup and there is no soft start, so the whole saw lurches when you hit the switch. Readings in a domestic garage sit comfortably above 95 decibels during a cut.

Ear defenders are not optional with this machine. Neighbours in terraced housing will hear it clearly through a shared wall.

Vibration is moderate at idle and noticeable in the cut. The lightweight table transmits more buzz than a heavier cast iron top would. Bolting the stand feet to a plywood base calms things down and also stops the saw creeping across the floor.

Cutting metal adds a harsh ringing tone on top of the motor noise. It is unpleasant, but it is brief, because the saw cuts steel surprisingly quickly.

Safety Features Included

You get a riving knife, a clear blade guard with anti kickback pawls, a push stick, and a no volt release switch that prevents restart after a power cut. For a budget saw that is a reasonable package.

The riving knife is the most valuable item on that list. It sits behind the blade and stops the kerf closing on the back teeth, which is the main cause of kickback.

The blade guard is removable without tools, which is both good and bad. Good because changing blades is quick. Bad because it is tempting to leave it off.

There is no flesh detection technology at this price point. There is no brake either, so the blade coasts for several seconds after shutdown. Keep hands clear until it stops completely.

What The Fury 5 S Does Not Do Well

Honest reviews list failures, so here they are. The fence only locks at the front and that will frustrate you. Precision cabinet work needs repeatable setups, and this fence fights you.

Long term owners report the folding leg pivots developing play after a year. The mitre lock loosens under use. Neither issue stops the saw working, but both chip away at accuracy.

The table is too small for full sheet goods. Breaking down a sheet of plywood alone on this saw is awkward and unsafe without roller supports.

Dado stacks are not supported. The arbor is too short and the saw is not rated for it.

Finally, parts availability varies now that the model has been discontinued in several markets. Check spares before you commit.

Pros And Cons

Pros

• One blade cuts wood, mild steel, aluminium, and plastic, which removes blade swapping entirely
• Price sits well below comparable jobsite saws from the big brands
• Folding stand is included rather than sold separately
• Three year warranty once you register the product
• Light enough at 28kg for one person to move short distances
• Riving knife, guard, pawls, and no volt switch all come as standard
• Cuts metal cleanly with warm chips instead of dangerous sparks
• Good depth of cut at 85mm for a saw in this bracket

Cons

• Rip fence locks at the front only and needs checking at the rear every time
• Mitre gauge has play and will not hold precise angles
• Dust extraction captures roughly half the debris
• Very loud with no soft start and no blade brake
• Table flexes under heavy workpieces
• Supplied 24 tooth blade leaves rough finish on hardwood
• Pivot joints loosen over extended use
• No dado capability and limited sheet goods capacity

Who Should Buy This Saw

The Fury 5 S suits the home user who builds mixed projects. If your weekend involves framing a shed, cutting steel brackets, and trimming plastic trunking, this saw handles all three without a blade change. That is a real and rare convenience.

It suits people on tight budgets who need a saw now. It suits metal fabricators who want a bench saw as a secondary tool.

It does not suit cabinetmakers. Furniture work demands a fence you can trust blind, and this fence is not that.

It also does not suit site professionals. Daily abuse will find the weak pivots fast. If the saw earns your living, spend more and buy a DeWalt or a SKIL with rack and pinion fence adjustment.

Price And Value In 2026

Street pricing has drifted since Evolution discontinued the model in some regions. Where stock remains, the saw typically lands well under the cost of an entry level DeWalt or Bosch jobsite saw, and the included stand widens that gap further.

Value depends entirely on how you weigh the metal cutting ability. If you never cut steel, a dedicated wood saw at similar money will give you a better fence and better finish.

If you do cut metal, the maths changes completely. An abrasive chop saw plus a wood table saw costs considerably more and occupies twice the floor space.

Factor in one replacement blade per year of mixed use. Factor in a crosscut sled you will build yourself. With those adjustments the Fury 5 S remains a sensible purchase for hobby workshops.

Setup Tips That Improve Results

Square the blade to the table with an engineer’s square before the first cut. The factory setting is close but rarely perfect.

Align the fence parallel to the mitre slot, not to the blade. Use a combination square from the slot to the fence at both ends.

Bolt the stand to a sheet of 18mm plywood. The saw stops walking and vibration drops noticeably.

Fit a zero clearance insert cut from hardboard. It reduces tearout dramatically and costs almost nothing.

Add a short auxiliary face to the fence using straight pine. It stiffens the rear end and gives you something to clamp feather boards onto.

Keep the supplied blade for metal and buy a 40 tooth blade for wood. Swapping blades takes two minutes and the finish difference is enormous.

Final Verdict

The Evolution Fury 5 S is a flawed saw that still makes sense for the right buyer. It cuts steel without drama, it costs little, and it comes complete with a stand.

The fence is genuinely annoying and I will not pretend otherwise. The mitre gauge is poor. Dust control is basic. Noise levels demand hearing protection.

Accept those limits and the saw rewards you. Hobby woodworkers and mixed material DIY users get enormous capability per pound spent.

Professionals should look at the Rage 5 S instead, which fixes several of these complaints with a stronger motor and better fence design. Anyone focused purely on timber should consider the DeWalt or SKIL alternatives listed above. For everyone else, this remains a likeable budget workhorse.

Frequently Asked Questions

Can the Evolution Fury 5 S really cut steel?

Yes. The tungsten carbide tipped blade cuts mild steel plate up to around 6mm and box section up to 3mm. The slow blade speed produces warm chips instead of sparks. Clamp the work firmly and feed slowly.

Does it come with a stand?

Yes. A folding tubular steel stand is included in the box. You bolt the legs on during assembly, which takes roughly thirty minutes.

What blade size does it take?

It takes a 255mm blade with a 25.4mm bore. Both multimaterial and wood specific blades in that size will fit.

Can I use a dado stack?

No. The arbor is too short and the saw is not rated for dado sets. Use a router or multiple passes instead.

Is the fence accurate?

The fence holds position during a cut but locks only at the front. Measure at the front and rear of the blade before every rip to avoid tapered cuts.

How loud is it?

Very loud. Expect readings above 95 decibels during a cut. Hearing protection is essential every time you switch it on.

Is the Fury 5 S still available in 2026?

Evolution has discontinued the model in several regions. Stock still appears through third party sellers, so check spare parts availability before buying.